63 www.vishay.com vishay spectrol revision: 27-jul-12 1 document number: 57027 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 3/8" square (10 mm) single-turn cermet trimmer the model 63 cermet trimmer is available in several pin configurations for top or side adjustment and with a choice of knob styles for finger setting. quick adjustment is achieved with multi-finger wi per and the standard resistance range is between 100 ? and 2 m ? with a tolerance of 10 %. features ? arrow and graduations fo r repeatable settings ? o ring seal for solvent and aqueous washing ? rigid board mounting achieved with pins secured in housing ? multi-finger wiper for be tter contact resistance ? solid end stop ? tests according to cecc 41000 or iec 60393-1 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 dimensions in inches (millimeter s) 0.02" (0.5 mm) 6 3 m 6 3s 6 3 p6 3 x 0.01 (0.25) 0.188 (4.78) min. 0.020 x 0.012 (0.51 x 0. 3 0) 0.190 (4.8 3 ) 0.2 0.010 (5.1 0.25) 0. 3 95 (10.0 3 ) 0.100 (2.54) 0.045 (1.14) 0.100 (2.54) 0.177 (4.5) 0.100 (2.54) 0. 3 75 (9.52) 0. 3 75 (9.52) 0.40 (1.02) 0.100 (2.54) 0.100 (2.54) 0.100 (2.54) 0.01 (0.25) s pectrol t607 (all pin styles) 0.410 (10.41) ? 0. 33 0 (8. 3 8) t640 (pin styles p and m) ? 0.550 (1 3 .97) 0. 3 20 (8.1 3 ) t614 (all pin styles) 0.119 ( 3 .02)
63 www.vishay.com vishay spectrol revision: 27-jul-12 2 document number: 57027 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications effective travel 270 nominal resistance range 100 ? to 2 m ? resistance tolerance 10 % en d resistance 2 ? or 1 % whichever is greater temperature coefficient of resistance (typical) 100 ppm/c power rating 0.5 w at + 70 c derated li nearly to 0 w at 125 c maximum voltage not to exceed 250 v circuit d iagram dielectric withstan d voltage 1000 v ac at sea level; 250 v ac at 80 000 ft (24 000 m) insulation resistance (500 v dc ) 1000 m ? minimum contact resistance variation 1 % or 1 ? , whichever is greater mechanical specifications mechanical travel 300 50 starting torque 35 mnm max. weight 0.03 oz. (0.85 g) max. resistance element cermet 2 terminal a d justability 0.15 % of rt 3 terminal a d justability 0.05 % of applied voltage terminals pure sn (code e3) environmental specifications temperature range - 55 c to + 125 c climatic category 55/125/21 sealing ip64 performances tests conditions max. (r) change per cecc per iec per mil v ab /v ac 41100 vibration 98 m/s 2 , 10 hz to 500 hz 1 % 2 % (para 2.3.2) test fc (iec 6-2-6) method 204 electrical en d urance 1000 h 3 % - (para 2.5.16) - no equiv. sol d ering - - - (para 2.3.7) test tb (iec 68-2-20) method 208 resistance to heat - 1 % - (para 2.3.7) test b (iec 68-2-20a) method 210 damp heat stea d y state 21 days 3 % - (para 2.1) test c (iec 68-2-3) method 103 mechanical life 200 cycles 3 % - - method 2 - terminal strength 2.2 lbs. (1 kg) min. - - - - marking ? vishay trademark ?model ? resistance value ? tolerance ? date code ? terminal identification a c b cw (2) (3) (1)
63 www.vishay.com vishay spectrol revision: 27-jul-12 3 document number: 57027 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 packaging ? in box of 200 pieces code b40 (bo200) ?on request : in box of 100 pieces code b30 (bo100) in tube of 50 pieces code t20 (tu50) ordering information (part number) model style ohmic value tolerance packaging code special number m63 p m x s from 100 ? to 2 m ? 201 = 200r k = 10 % b40 = box 200 pieces on request: b30 = box 100 pieces t20 = tube 50 pieces (if applicable) given by vishay for custom design description (for information only) 63 p 200u 10 % t607 bo200 e3 model style value tolerance special packaging lead finish 201 k b4 t 0 3 m p 6 06 7
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
